Mechanical Injection Packer 5/8″ Double Check Valve

High pressure steel 5/8″ x 4.75″ expanding injection port with zerk fitting. Contains an additional check valve on the inserted end.  This enables the stem to be removed without material coming back out.  Works best with a 5/8″ drill bit.

 

 

SKU: PACKER5/8DC Categories: , Tags: ,

$52.50$525.00

Have a Question?

Description

High pressure steel 5/8″ x 4.75″ expanding injection port with zerk fitting. Contains an additional check valve on the inserted end.  This enables the stem to be removed without material coming back out.  Works best with a 5/8″ drill bit.

Dimensions

Weight 1 lbs
Dimensions 5 × 5 × 5 in
Options

10 Packers, 20 Packers, 50 Packers, 100 Packers

Details

HyperFlex is a highly versatile single component, pre-catalyzed hydrophobic polyurethane grout. Because it is pre-catalyzed there is none of the guesswork and expense of field mixing catalyst; simply adjust the temperature of the HyperFlex container to vary your reaction time. Since it is a hydrophobic material shrinking will not be an issue like it can be with hydrophilic materials. HyperFlex is NSF 61-2007 approved for contact with potable water.

Applications:

  • Low or high pressure crack injection
  • Barrel joint repair
  • Annulus grouting
  • Underwater leak sealing

HyperFlex is a slower reacting product than our SealGuard II and works well in weeping or low flow leaks. The slower reaction and lower viscosity allows the material to travel further before reaction, allowing for better penetration and coverage within the leaking substrate. Once cured, HyperFlex will form a permanent, non-shrinking seal against further leaks.

  • Packaging: 300 ml Caulk Tube
  • Transport: USDOT Unregulated Class 55
  • Storage: Product is moisture sensitive and should be stored at 60-70⁰. Product should not be exposed to the atmosphere until application. Avoid contact with moisture.

Always read SDS before use.

Resources

Technical Data Sheet HyperFlex

MSDS HyperFlex

Low Pressure Crack Injections

High Pressure Crack Injection

Underwater Crack Repair

Curtain Grout using Soil Rods

Leaking Barrel Joint / Lateral Boot

Concrete Crack Injection / Precast Joint

Joining and Sealing Pre-Cast Concrete Sections using HyperFlex

Solving a Leak in a Corner

Casement Pipe Grouting

Aquastowing

Earthen Dam Repair

Mining Seal Repair

Orphan Bore Hole Sealing

Case Study: Ground Consolidation

Case Study: Pump Station Crack Injection

Case Study: Ground Stabilization Rotary Kiln

Case Study: Leaking Swimming Pool

Case Study: Shaft Grouting Coal Mine

Case Study: Water Control Coal Tunnel Powerplant

Don't See What You're Looking For??