Loading
SealGuard Inc Polyurethane Grout ISO 9001
Leak Sealant

"Fast, easy,
permanent repairs"

"Technical support was polite,
fast and accurate"

"SealGuard makes water control simple"
"This stuff works!"

"I find some new way to
use HyperFlex every day"

"SealGuard II makes I & I remediation
cost effective, efficient and fast"

"SealGuard staff walked me through my project
step by step until I got the water stopped"

"If you can't stop the water with SealGuard II,
it probably can't be stopped"

"X-Seal is a huge improvement over the mortar
we used before, it is so much faster and easier"

"X-Seal works with or
without butyl rubber"

"We stopped a 50 gpm leak in about
15 minutes, including set up"

SealGuard II Chemical Grout

SealGuard II is highly reactive dual component hydrophobic polyurethane with a 1 to 3 second reaction time. It is designed to stop rapid (>50 gpm) water flows into concrete or other underground structures. SealGuard II is hydrophobic, so it won't shrink, gives off no VOC's and requires no special breathing apparatus or other extraordinary personal protection equipment. Our patented check-valve in the static mixer allows a partially used tube set to be re-used; competing products require the entire tube set be used at once. In addition, the valve keeps the polyurethane, which can be hot during reaction, safely in the mixer.

  • Applications: High flow leaks which can be in excess of 50 gallons per minute in concrete, brick or stone structures
  • Packaging: Dual 600 ml 1:1 Caulk Tubes Transport: USDOT Unregulated Class 55
  • Storage: Product is moisture sensitive and should be stored at 60-70⁰. Product should not be exposed to the atmosphere until application. Avoid contact with moisture.

Always read MSDS before use.

SealGuard II 6 Pack Starter Kit SealGuard II 6 Pack Starter Kit

Contains all the equipment required to stop fast (in excess of 50 gallons per minute) leaks in any underground structure. The starter kit has 6 tube sets of SealGuard II with static mixers, goggles, gloves, tyvek suit, and a dual component hand caulking gun. All you need to supply is a 5/8 inch drill bit and a hammer drill.

Price$550.00
Qty
SealGuard II 12 Pack SealGuard II 12 Pack

Comes with 12 tube sets of SealGuard II and 12 static mixers.

SealGuard II requires a Dual Component Caulking gun for injection (available on this website).

Requires 5/8" drill bit.

Price$625.00
Qty
SealGuard II 6 Pack SealGuard II 6 Pack

Comes with 6 tube sets of SealGuard II and 6 static mixers.

SealGuard II requires a Dual Component Caulking gun for injection (available on this website).

Requires 5/8" drill bit.

Price$345.00
Qty
SealGuard II 2 Pack SealGuard II 2 Pack

Comes with 2 tube sets of SealGuard II and 2 static mixers.

For those "smaller jobs" when a 6 pack may be too much. SealGuard II requires a Dual Component Caulking gun for injection (available on this website).

Requires 5/8" drill bit.

Price$126.50
Qty
HI&I HI&I

Homeowners I & I Kit: 

Prevent grey water roof runoff from entering the primary wastewater processing stream. The kit seals the downspout access to the wastewater stream using a balloon & our SealGuard II fast reacting urethane foam.

The kit includes:

2 tubes of SealGuard II
2 Premium Mixers
2 Balloons

You will also need: 

A Dual Component Caulking Gun, (available on this website: Dual Comp Gun)
Duct or Electrical Tape

Price$119.00
Qty
Dual Comp Gun Dual Comp Gun
Price$100.00
Qty
Pneumatic Dual Comp Gun Pneumatic Dual Comp Gun
Price$550.00
Qty
Premier Mixers (12 ea) Premier Mixers (12 ea)
Price$63.37
Qty
Premier Mixers (6 ea) Premier Mixers (6 ea)
Price$32.00
Qty